Monday, December 11, 2006

VW 1500 on holiday, 1960s

Caravaning in a 1962 VW 1500 sunroof and Eriba Faun trailer sometime in the 1960s. That's a pretty big trailer for 54 horses.



Saturday, December 9, 2006

Automotive News announces "big" VW, March 1961

The bi-weekly auto industry trade journal Automotive News broke the VW 1500 story in the US in March 1961.



Unlike The Autocar they got their facts about the 1500 straight. The article notes that its public debut would be at the Frankfurt show in September, and that VW had no plans to market the 1500 in the US.

Thursday, December 7, 2006

More early engine reference

Many thanks to Andy Holmes for sending these early 1500 engine images. Andy is the owner of an immaculate 1965 1500S Karmann-Ghia and is currently restoring an early '62 1500 Ghia. He's well on his way to having the bodywork completed -- check out Andy's restoration blog to see how things are coming along.



The first is factory press photo with another cutaway view of an early engine. It's interesting for its detail but also for the features it includes that didn't make it into production, such as the crankcase breather arrangement described here, the rubber strap that holds the top of the air cleaner in place (a metal clamp on production cars), a different tailpipe mounting arrangement, and the unusual plug wire separators that were used on VW's 36-horse engines circa 1960 (one visible just below the air cleaner). Andy's favorite feature: the artist's dramatic addition of a spark igniting the fuel mixture in cylinder #3 (upper left).



This is the engine bay of one of the 1500s on display at the Frankfurt Auto Show, the 1500's official public debut in September 1961. This photo provides answers to some questions I've had about when certain features were introduced. For one thing, it proves that the unusual features seen in the press photo above were all dropped sometime before full production began. It also confirms that the Knecht air cleaner should have a small washer under the wingnut. Air cleaners produced by Mann for the 1500 had a large, specially shaped washer that would have been hard to lose, but I've never seen a Knecht filter with a washer. Must've all gotten lost during service. The air cleaner doesn't have a connection port for a crankcase breather hose, so that supports the idea that the port was introduced around the beginning of 1962. Both of these images also show a full-sized Bosch coil. There's been some debate about whether the early engines came with a long or short coil, but these images seem to settle it. Interesting that there's no insulation under the engine trapdoor -- I wonder when that was added?

Thanks again, Andy. The obsessive engine detailers among us are much obliged.

Sunday, December 3, 2006

Progress

Things are starting to come together. The oil cooler, distributor, fuel pump, and crankcase breather stand are in place. I used Gasgacinch on the paper gaskets to minimize leaks.




I found an NOS '62 oil cooler at Bill and Steve's in Downey, California. They used to have a box full of them, but I think I got their last one. Bill and Steve's was the center of the Type 3 universe in the late 1980s and early 1990s. Now it's just a good neighborhood auto parts store that specializes in aircooled VWs, which is becoming a rare thing these days. They still have a small display case of hard-to-find Type 3 parts. Yes, I forgot the carb return spring bracket. I realized it as I was taking the photos.



I cleaned up the F&S clutch disk and pressure plate and reinstalled them. They are date stamped 1989 and the previous owner had them installed in 1992 according to her records. The car has only traveled about 5000 miles in the last 14 years, so they're almost new.




The heat exchangers are installed and the newly powder coated tin is in place. The next step will be to install the fan housing so I thought I'd get a shot of the early case's part number while I had the chance. Won't be seeing it again for long while.



Or so I thought. While I was installing the rear half of the fan housing the threads in the case stripped when I tightened the left mounting bolt. Tapping the hole deeper and using a longer bolt failed too. It's helicoil time.

VW workshop tools

I've started collecting VW factory workshop tools. I've been looking for Type 3-specific tools in particular, but also general VW tools that have an application on the VW 1500. Here are some of the tools I've found that have been put to use in my engine overhaul project:



Clockwise from the left: VW 176, Type 3 fan puller; VW 215b, 6-volt flywheel lock; VW 113, thin 27mm wrench that the VW Workshop Manual recommends for the generator pulley nut; VW 177, Type 3 fan housing centering tool; VW 178, special 13mm wrench for the lower sidedraft carburetor mounting nut; and VW 170, crankcase breather socket. VW factory tools were made by several different manufacturers. Most of the tools pictured here were made by Matra, but the carb wrench was made by Lucas. There may be other tools that will do the jobs that these will, but these do the job better.

The tool I'd really like to have is VW 660, the Type 3 timing gauge. Due to the design of the Type 3 fan and pulley housings timing the engine can be a little tricky. Timing by eye is possible but it involves getting the work light positioned just right, standing directly over the timing hole, closing one eye, and lots of luck. VW realized early on that a gauge would be a big help. There are several different versions of the gauge. VW intended them all to be made locally, but I think some may have been manufactured too.



The simplest one is just cut out of flat metal stock. Henry Elfrink's Volkswagen Type 3 Technical Manual shows a photo of the gauge in use and provides a plan drawing so you can make your own.



A more elaborate version of VW 660 is shown here (photo courtesy of The Samba's image gallery -- I think this one might belong to Mr. Everett Barnes himself). It features a spring clip that holds the gauge in place, leaving your hands free to actually do the work. Plans for an even more elaborate version of VW 660 with a built-in timing light can be found in VW's Workshop Equipment for Local Manufacture manual, which someone has helpfully posted online. The site is a great resource. Eventually I'll make my own VW 660 gauge, but for now I'm still eyeballing it.

Saturday, December 2, 2006

VW 1500 engine cutaways

Here are some nice cutaway drawings of early 1500 engines.



This one is from the 1961 edition of the VW 1500 Workshop Manual.



I'm not sure of the source for this one, but I think it's pre-production since it has features that were never combined on any production engines, at least as far as I know. It shows a crankcase breather tube, which in some pre-production photos is shown connecting to the air intake instead of the air cleaner. I don't know if this arrangement ever made it into production -- if it did it would have been on only the earliest cars produced in late 1961. The heat riser valve is also pictured, but that wasn't actually introduced on production cars until late 1962.

Friday, December 1, 2006

International Auto Parade, 1962

I'm a sucker for those old auto catalogs from the '50s and '60s that show every car available in the world in any given year, including Automobile Year, Automobile Revue, World Cars, and International Auto Parade (a.k.a. Auto-Universum). They tend to follow a standard format that consists of a general overview of the automotive year with articles about new trends, detailed reviews of particularly notable models, and postcard images of the cars of the world accompanied by technical specs, interspersed with lots of full color ads. I try to pick these up whenever they're cheap.



The dust jacket of the 1962 issue of Auto Parade featured the new VW 1500.



Here are the new 1500s along with a Type 1 Ghia in the same issue. Ruby Red seems to have been the color of the year. For some reason the 1500 Ghia didn't appear until the next issue in 1963.